Kit includes:

• 3x Suction Cups
• 3x Rods: 3 inch
• 9x Rods: 6 inch
• 6x Ball Tilt Heads
• 1x Camera Hub

Features:

Extension Rods:

• Extension rods are provided in two sizes (3 and 6 inch),
  which can be used in any way
• The rods can be extended to the desired length. These
  extensions are solid, durable black ABS plastic (not hollow
  
• tubes), made with 1/4 scew at one side and 1/4 screw hole
  on the other end.

Suction Cups:

• The suction cups are very sturdy and robust in nature.
• The cups are very light in weight, yet can bear the
  camera weight of up to 2.5 kg.
• It's easily stuck and held tightly with the side lever.
• Once it is tightened, the cup cannot be removed unless
  the lever is pulled out.

Camera Hub:

• The camera is attached on this system with the camera
  hub. There are holes on camera hub to align rods in different
  direction. Side holes are for striaght set up of rods and holes
  on inner and outer circumference can be used for angular
  
• set of arrangements.

Ball Tilt Head:

• The ball tilt head allows the camera to move in the desired
  direction. It's a very flexible, strong and sturdy head. It helps
  in achieving extra height. It joins the two rods together.
• These ball heads are made of pressure die casting. The upper
  head moves vertically and the lower body base moves horizontally.
• The ball head is made of aluminium powder coating, a very
  strong and robust material.

Proaim Campod:

• The Proaim Campod is flexible to be used in different ways. You
  can use all 12 rods (3 and 6 inches) together or separately.
• The Proaim Campod can be set on window glass, back, top or
  on the front of the car
• Mount the camera on this setup outside or inside of any vehicle
• Travelling shots from different angles can be taken with this setup
  
  

Storage Cases: