• Made of black anodized aluminum
• CNC machined
• Double bearing
• Easily movable handle
• Universal camera base plate
• Adjustable gimbal
• Weight holding plate
• Weights for balancing your camera

• Wheelbarrow bearing provides rotational control over the
  camera so it can be easily rotated on its axis

• Grip swivels left and right from the bolt; can easily move
  the whole steadicam up and down
• Angle bracket enables grip to move up and down
• The camera is mounted on one end of the 'post', and the
  battery and monitor (and whatever special electronics the
  operator has added) are mounted to the other end

Universal Camera Base Plate:

The camera base plate has both 1/4-inch and 3/8-inch mounting
slots (holes) to accommodate a variety of camera bases. You
can slide your camera with base plate of steadicam on both the
horizontal and vertical axes, attached with thumbscrews on a
movable camera base plate. The camera platform moves back
and forth, and from side to side, to allow you to quickly adjust
the camera's horizontal balance. By varying the amount of
counterweight discs on the base platform, you adjust the
camera's vertical balance. When balanced properly the camera
floats, ready for you to move into action.

The stabilizing system contains weights with the main function
of balancing your camera. We provide 8 weight discs with this
flycam kit. You can add or remove weights as needed. Weights
are kept in four cups. Weights are made of aluminum. Weights
are attached to the rod with cups and screws.

Telescopic Post:

Flycam 3000 has a telescopic post and can be extended. Its
height can be adjusted according to the weight of the camera.
The arm/wrist support brace is designed to distribute the weight
of the system over the entire forearm of the operator. This
support brace not only provides the operator with cushioned
comfort while shooting, but also eliminates the torque, which
would otherwise cause stress on the operator's wrist.